Minion Attack! Wave Two "I'll Be Bananaaa" WIP #1

Now for the second wave of the Minion Attack!

This one is a Terminator themed figure based on the Arnold Schwarzenegger character from the first film. The minion comes with a shotgun in one hand and ammo belt slung over the shoulder. He is also dressed in a leather jacket just like Arnold did in the film, but no sun glasses, though this might be rectified as I build him.

Another little detail which it good on this figure, is the damage to the skin on the Minions head exposing the metal skull underneath. This will either be painted with a metal effect paint or covered with some Bare Metal Foil.

On this figure, I only needed to pin one of the arms. The other sits flush to the body giving plenty of area for the glue to do its job. I used some brass wire for the pin on the other side and glued into the arm first. All I needed to do was to bend the wire slightly to get the pose right on the figure. You can just make out the pin in the first photo below.

Minion Attack! Wave One "Paaarp!" WIP #1

The Attack of the Minions has been started. First one on the bench is Paaarp!

This one is a bit more straight to build compared to the other two. The moulding of this figure was very clean and after removing the excess resin from the pouring process, only a little bit of sanding and filing was needed. I decided to pin the arms and trumpet to ensure that they would not be knocked off the figure once it was built and painted. I also stuck a pin in one of the feet ready for when I fix him to his display base once finished. I forgot to take some photos of how I did the pins before assembling the parts to the body, but I will make sure I take some on the next two figures over the next couple of days. 

Next for this figure, clean off any excess glue from the arm joints and fill any gaps around where the arms join the body. Once I am happy with the joints, the figure will be given a wash to remove any residue from the moulding process before a couple of coats of primer and painting.

Arado Ar 240C-2 Nightfighter Finished

So far this year, that is five models hitting the finished state. Fair enough, three of them were started before we moved house, the Lightning and Diamond T last year and the Eagle two and a half years ago, but the Messerschmidt Bf 109 and the Arado were started this year and completed. Which I think is good considering that we are still settling into the new house and getting things sorted out around it.

Now the Arado. This is a nice little kit from Revell, I had no major issues with it, possibly none from what I can remember. Straight out if the box it has been a joy to build, even though you only get one scheme option with the aircraft. But this was a rare aircraft as only fourteen Ar240's were ever built in various versions and they were all converted to reconnaissance aircraft by 1942, so there would not be many options for it anyhow. The aerials on the nose can easily be knocked off as I have found through handling the model in the final stages of building it. So it would be an idea to insert some wire pins on them to go through the nose. 

When painting the camouflage on the model, I manage to airbrush the pattern instead of using a normal paint brush. This has made the scheme look more subtle compared to some I have seen done with the brush. The model was finished off with some paint chipping and various staining from exhaust, oil and other engine grime before a final coat of general grime over the model. The resulting finished model being something different from the other aircraft I have hanging up and on the shelves. In all, a nice model to build.

Intro To The Minions!

If you visit the various model show around the country (the UK), you may have seen Minions figures on some of the club stands. A few of the members at my former club, Milton Keynes SMC, have made several of these figures and they have appeared on the stand at several shows they have attended. So a few months back I picked up a few produced by Retrokit for myself to build.

Judge Bananaaa!

This Minion figure is based on the Judge Dread character from 2000AD comics and the film by Sylvester Stallone. He is wearing the Judge's uniform and holding a banana in his right hand instead of a gun. The thing I liked about this figure is the sulky expression on his face, just like the character in the comic strip and film.

Paarp!

This figure is your classic Minion dressed in denim dungarees, but in his hands he is holding a fart gun. In my own opinion, I think he actually looks like Kevin from the movies.

I'll be Bananaaa!

The last one in my collection, so far, is the figure based on the Terminator character played by Arnold Schwarzenegger. Complete with his leather jacket and large machine gun in hand, it was another one which jumped out and caught my attention. He is finished off with the skin damage on his head showing the metal plate of the skull showing through. 

These figure will be very easy to build as there is only three or four parts in each one, the hard work will be cleaning them up and painting them. These will be the first ones which I plan to collect, the range seems to keep changing each time I look.So expect to see a few more added after my visit to the Birmingham show in a few weeks time. But to keep your interest in Minions, here is a set I pick up whilst shopping last week standing on guard in front of a couple of my tanks.

Arado Ar 240C-2 Nightfighter WIP #2

This are progressing nicely on the Arado, even though not much has been done over the last few days due to doing some work on the gardens, a BBQ and popping out on Sunday to see the Minions film and do a little shopping. And talking about Minions, I have three resin Minion figures that I am going to start building very soon. I will post an intro to them next.

Anyhow, back to the Arado. All of the decals have been done and they have been sealed with some matt clear. The only fiddly ones were the walkways on the wings and they had me cursing a few times trying to get them in position. Otherwise, everything passed without any hiccups on the decal side.

Final assembly has now started with the adding of the undercarriage followed by a going over with some black wash to tone things down on the gear and in the bays. Each of the tyres were also flat spotted they are in contact with the ground. Exhaust staining has also been added to the rear of the exhaust positions using weathering powders.

On the construction side, the model is about 95% done now with just a few small parts left to be added and painted. I will be doing some more weathering to the model as it would look too new and clean if I left it in this state. So it has the calling for Mr Grubby to come out and do his thing. The next posting on this project will be of the completed model, all with a bit of dirt on it.